Diagnosis Procedure
1.
CHECK SELF-DIAGNOSIS RESULTS
Turn ignition switch OFF.
Turn ignition switch ON.
Perform “Read All DTCs” with M.U.T.-III SE.
Check if any DTC other than “C1F04-48” is detected in “Self Diagnostic Result” of “ACC/ADAS 2”.
Is any DTC detected?
Replace the ADAS control unit 2. Refer to
Removal and Installation
.
Perform the distance sensor alignment. Refer to
Work Procedure
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Replace the ADAS control unit 2. Refer to Removal and Installation
.
Perform the distance sensor alignment. Refer to Work Procedure .