![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
| ON | : Steering vibration motor is activated. |
| OFF | : Steering vibration motor is not activated. |
| Spiral cable | ADAS control unit 2 | Continuity | ||
| Connector | Terminal | Connector | Terminal | |
| M30 | 2 | B4 | 16 | Existed |
| 3 | 40 | |||
| Spiral cable | Ground | Continuity | |
| Connector | Terminal | ||
| M30 | 2 | Not existed | |
| 3 | |||
Repair the harnesses or connectors. | Spiral cable | Continuity | |
| Terminal | ||
| 2 | 35 | Existed |
| 3 | 34 | |
Replace spiral cable. | ADAS control unit 2 | Condition | Voltage (Approx.) | ||
| Connector | Terminal | |||
| + | - | |||
| B4 | 40 | Ground | At “STRG vibration” test of “Active test” | 12 V |
Replace the steering vibration motor. Refer to Removal and Installation
.
Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC IndexDTC Index
.
Replace the ADAS control unit 2. Refer to Removal and Installation
.