[Previous][Next]
Removal and Installation
 
 
REMOVAL
 
 
1. Remove the power liftgate inner finisher. Refer to Removal and Installation.
2. Remove the rear camera mounting bolts , And then push the pawls in the direction of the arrow in the figure to remove the rear camera.
 
 
INSTALLATION
 
 
1. Install in the reverse order of removal.
2. Perform camera image calibration. Refer to Work Procedure.
cautionPerform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.) and replacing the around view monitor control unit.