[Previous][Next]
Removal and Installation
cautionNever damage the power liftgate panel.
 
 
REMOVAL
 
 
1. Fully open power liftgate.
2. Apply protective tapes (A) on the power liftgate panel to protect it from damage.
3. Disengage power liftgate inner finisher fixing clips using a remover tool (A), and then power liftgate inner finisher.
: Clip
 
 
INSTALLATION
Note the following items, and then install in the reverse order of removal.
caution
  • Visually check clips for deformation and damage during installation. Replace with new ones if necessary.
  • Check in advance that clips are accurately aligned with the portions on power liftgate panel, and then install by pressing in.