Removal and Installation
note
Perform ADDITIONAL SERVICE WHEN REPLACING 8CH CAN GATEWAY. Refer to
Work Procedure
.
REMOVAL
1.
Remove combination meter. Refer to the following.
Full TFT meter:
Removal and Installation
7 inch information display:
Removal and Installation
2.
Remove instrument lower panel LH. Refer to
Removal and Installation
.
3.
Remove mounting screw
.
Without ethernet harness connector
With ethernet harness connector
4.
Remove harness connector
to remove 8CH CAN gateway
.
Without ethernet harness connector
With ethernet harness connector
INSTALLATION
Install in the reverse order of removal.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
..
.)
)
to remove 8CH CAN gateway
.)
)