Removal and Installation

caution

When replacing the combination meter, always replace it with a new one. The functions controlled by the combination meter does not operate properly in case of reuse of the combination meter from another vehicle.
Be sure to perform the configuration when replacing combination meter. Refer to Work Procedure.

REMOVAL

1. Disconnect the battery cable from the negative terminal.

2. Remove cluster lid A. Refer to Removal and Installation

3. Remove the mounting screws

of the combination meter

4. Pull the combination meter outward, then disconnect harness connectors and remove.

caution

Never damage the display.

INSTALLATION

Installation is in the reverse order of removal.

caution

Never damage the display.
When replacing the combination meter, always replace it with a new one. The functions controlled by the combination meter does not operate properly in case of reuse of the combination meter from another vehicle.
Be sure to perform the configuration when replacing combination meter. Refer to Work Procedure.