[Previous][Next]
Removal and Installation
cautionDisconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
 
 
REMOVAL
 
 
1. Remove front bumper fascia. Refer to Removal and Installation.
2. Disconnect headlight and front combination light harness connectors.
3. Remove headlight and front combination light mounting bolts.
4. Pull out headlight and front combination light forward the vehicle.
5. Remove harness clip of headlight rear side, and then remove headlight and front combination light.
6. Disconnect headlight harness connector from front combination light.
7. Remove headlight and front combination light mounting bolts, and then remove headlight.
 
 
INSTALLATION
Note the following item, and then install in the reverse order of removal.
cautionAfter installation, perform aiming adjustment. Refer to Adjustment.