Disassembly and Assembly
DISASSEMBLY
1.
Remove door mirror assembly. Refer to
Removal and Installation
.
2.
Remove glass mirror. Refer to
Removal and Installation
.
3.
Remove door mirror cover. Refer to
Removal and Installation
.
4.
Remove door mirror finisher fixing screws
.
With side turn signal light
Without side turn signal light
5.
Disengage door mirror finisher fixing pawls, and then remove door mirror finisher.
: Pawl
6.
Disconnect side camera harness connector
(with side camera).
7.
Remove side camera fixing screw
, and then remove side camera (with side camera).
8.
Remove side turn signal light (with side turn signal light). Refer to
Removal and Installation
.
9.
Remove door mirror actuator fixing screws
.
10.
Disconnect harness connectors
and
, and then remove door mirror actuator.
ASSEMBLY
Note the following item, and then assemble in the reverse order of disassembly.
caution
Perform side camera image calibration (with side camera). Refer to
Work Procedure
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
...
.)
)
)
(with side camera).)
, and then remove side camera (with side camera).)
..)
and 
, and then remove door mirror actuator..