[Previous][Next]
Removal and Installation
 
 
REMOVAL
cautionNever damage front door glass and front door panel.
 
 
1. Remove front door glass. Refer to Removal and Installation.
2. Disengage fixing portion using a remover tool (A) according to numerical order 1→2 as shown in figure, and then disconnect power window motor harness connector.
: Vehicle front
3. Loosen front door regulator assembly mounting bolt , and then remove front door regulator assembly mounting bolts .
4. Remove front door regulator assembly from open part of front door panel.
 
 
INSTALLATION
Note the following items, and then install in the reverse order of removal.
caution
  • Check front door regulator parts for lubrication. If necessary, apply body grease.
    : Body grease
  • Tighten front door regulator mounting bolts to the specified torque. Refer to Exploded View.
  • After installing front door glass, perform the inspection and adjustment. Refer to Inspection and AdjustmentInspection and Adjustment.