Inspection and Adjustment
CHECK ANTI-PINCH FUNCTION
FITTING INSPECTION
- Check that front door glass is fit securely into the sash groove.
- Lower front door glass slightly [approximately 10 to 20 mm (0.394 to 0.787 in)], and check that the clearance to the sash is parallel. Loosen the regulator mounting bolts, guide rail mounting bolts, and glass and guide rail mounting bolts to correct the glass position if the clearance between the glass and sash is not parallel.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.