[Previous][Next]
Work Procedure
1.CHECK ANTI-PINCH FUNCTION
  1. Fully open the front door glass (driver side).
  2. Place a piece of wood near fully closed position.
  3. Close front door glass (driver side) completely with AUTO-UP.
  4. Check the following conditions.
    • Check that front door glass (driver side) lowers for 150 mm (5.9 in) without pinching piece of wood and stops.
    • Check that front door glass (driver side) does not rise when operating the power window main switch while lowering.
      caution
      • Perform initial setting when AUTO-UP operation or anti-pinch function does not operate normally.
      • Check that AUTO-UP operates before inspection when system initialization is performed.
      • Never check with hands and other body parts because they may be pinched. Never get pinched.
: END