[Previous][Next]
Removal and Installation
cautionNever damage the body panel.
 
 
REMOVAL
 
 
1. Remove front kicking plate. Refer to Removal and Installation.
2. Release dash side finisher portion of front body side welt.
3. Remove hood lock control handle. Refer to Removal and Installation.
4. Disengage dash side finisher from dash side clip .
5. Disengage dash side finisher fixing clip, and then remove dash side finisher.
: Clip
 
 
INSTALLATION
Note the following items, and then install in the reverse order of removal.
caution
  • Visually check clip for deformation and damage during installation. Replace with new ones if necessary.
  • Check in advance that clip is accurately aligned with the portions on body panel, and then install by pressing in.