[Previous][Next]
Removal and Installation
cautionNever damage the body panel.
 
 
REMOVAL
 
 
Front Kicking Plate
Disengage front kicking plate fixing pawls according to numerical order 1→4 indicated by arrows as shown in the figure.
: Pawl
 
 
Rear Kicking Plate
Disengage rear kicking plate fixing pawls and clips according to numerical order 1→3 indicated by arrows as shown in the figure.
: Clip
: Pawl
 
 
INSTALLATION
Note the following item, and then install in the reverse order of removal.
caution
  • Visually check clip for deformation and damage during installation. Replace with new ones if necessary.
  • Check in advance that clips and pawls are accurately aligned with the portions on dash side finisher, center pillar lower garnish, luggage side lower finisher and body panel, and then install by pressing in.