![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
| warning | Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait for 3 minutes or more (discharges electricity held in the additional power supply circuit of the air bag diagnosis sensor unit). |
| caution | When removing, always use a remover tool that is made of plastic to prevent damage to the parts. |
)
 | : Pawl |
)
)
| : Pawl |
)
| note |
|
, and then remove shoulder anchor.)
..
and remove anchor bolt , and then remove lap pre-tensioner.)
 | : Vehicle front |
| caution |
|
.)
.)
| caution |
|
| caution | Never place seat belt pre-tensioner retractor and lap pre-tensioner in an area where the temperature reaches 80°C (176°F) or more. |
., and then remove seat belt adjuster.)
| caution | If come off release button from seat belt adjuster, install following procedure.
|
)
)
)