[Previous][Next]
DIAGNOSIS TROUBLE CODE CHART
cautionOn troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnostic trouble code(s) associated with other system may be set. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
ETACS-ECU
DTC No.Diagnostic itemReference page
B16A2Blown turn-signal light (LH) bulb
B16A3Turn-signal light (LH) short circuit
B16A4Blown turn-signal light (RH) bulb
B16A5Turn-signal light (RH) short circuit
B16A9Turn light (LH) deactivated
B16AATurn light (RH) deactivated