[Previous][Next]
REMOVAL AND INSTALLATION
cautionIf the battery current sensor or engine control module is replaced, make the battery current sensor learn the zero point. (Refer to GROUP 00, Precautions Before Service - Battery Current Sensor Calibration.)
 
 
Removal steps
1.Battery current sensor
2.Connection of the battery harness [negative battery terminal]
3.Battery terminal assembly [negative battery terminal]
Air cleaner intake duct (Refer to GROUP 15 - Air Cleaner ).
4.Fusible link cover
5.Connection of the battery harness [positive battery terminal]
6.Connection of the fusible link box
7.Connection of the battery harness [positive battery terminal]
8.Battery terminal assembly [positive battery terminal]
9.Battery holder
10.Battery bolt
11.Battery
12.Battery tray