[Previous][Next]
REMOVAL AND INSTALLATION
 
 
The following bolts and screws are used for installing the instrument panel. Bolts and screws are indicated as marks shown in the illustration in the sections of "Removal and Installation" and "Disassembly and Assembly."
NameSymbolSize (D × L) mmColorShape
Tapping screwa5 × 14-
b5 × 16-
Bolt with washerc6 × 16-
 
 
caution
  • Before removing the passenger's (front) air bag module, refer to GROUP 52B - Service Precautions (refer to ) and Driver’s Air Bag Module and Clock Spring (refer to ).
  • Do not subject the SRS-ECU to any shocks when removing or installing the instrument panel.
Pre-removal and Post-installation Operation
  • Removal and Installation of Front Pillar Trim (Refer to ).
  • Removal and Installation of Instrument Panel Under Cover (Refer to ).
  • Removal and Installation of Glove Box Upper Cover (Refer to ).
  • Removal and Installation of Instrument panel cover lower (Refer to ).
  • Removal and Installation of Knee Air Bag Module (Refer to GROUP 52B - Knee Air Bag Module ).
  • Removal and Installation of Radio and CD Player Assembly (Refer to GROUP 54A - Radio and CD Player ). <Vehicles with radio and CD player>
  • Removal and Installation of Multivision Display Assembly (Refer to GROUP 54A - Smartphone Link Display Audio ). <Vehicles with smartphone link display audio>
  • Removal and Installation of Combination Meter Assembly (Refer to GROUP 54A - Combination Meter ).
Removal steps
1.Instrument panel side cover
Glove box side cover (Refer to .)
2.Passenger’s (front) air bag module connector connection (Refer to GROUP 52B - Passenger’s (front) air bag module .)
3.Instrument trim panel side air outlet
4.Instrument panel harness clamp
5.Instrument trim assembly
6.Instrument trim panel
7.Cooler duct
8.Ventilation air distribution duct
9.Defroster side duct
10.Defroster nozzle
11.Passenger’s (front) air bag module
12.Instrument panel