[Previous][Next]
REMOVAL AND INSTALLATION
 
 
•Washer tank (Refer to )
•Washer motor (Refer to )
Rear washer nozzle removal steps
•Liftgate spoiler (Refer to )
•High-mounted stoplight assembly (Refer to )
1.Rear washer nozzle assembly
Rear wiper blade removal steps
2.Rear wiper blade assembly
>>A<<3.Rear wiper blade
Rear wiper motor removal steps
4.Cover
>>B<<5.Rear wiper arm assembly
•Liftgate trim (Refer to GROUP 52A, Liftgate Trim )
6.Rear wiper motor assembly
7.Grommet
Rear washer hose removal steps
•Front/rear scuff plate, cowl side trim, quarter trim (Refer to GROUP 52A, Interior Trim )
•Liftgate trim (Refer to GROUP 52A, Liftgate Trim )
8.Rear washer hose (Liftgate side)
9.Rear washer hose (body side)
noteFor removal and installation of the wiper and washer switch, refer to GROUP 54A, Column Switch .
 
 
INSTALLATION SERVICE POINTS
 
 
>>A<< REAR WIPER BLADE INSTALLATION
cautionUse a curved backing like that shown for the backing of a wiper blade to ensure sustained wiper wiping performance.
 

 
 
>>B<< REAR WIPER ARM AND BLADE ASSEMBLY INSTALLATION
Assemble the wiper blade so that their edge stops at the specified position.
(A): Φ 2 marking ± 5 mm(0.2 in)