[Previous][Next]
REMOVAL AND INSTALLATION <FWD>
Post-installation operation
Front wheel alignment check and adjustment (Refer to .)
Stabilizer link removal steps
<<A>>>>C<<1.Stabilizer link and stabilizer bar connection nut
<<B>>>>D<<2.Stabilizer link and strut connection nut
3.Stabilizer link
Stabilizer bushing removal steps
<<A>>>>C<<1.Stabilizer link and stabilizer bar connection nut
4.Stabilizer bar bracket
>>B<<5.Stabilizer bushing
Stabilizer bar removal steps
<<A>>>>C<<1.Stabilizer link and stabilizer bar connection nut
4.Stabilizer bar bracket
>>B<<5.Stabilizer bushing
>>A<<6.Stabilizer bar
 
 
REMOVAL SERVICE POINT
 
 
<<A>> STABILIZER LINK AND STABILIZER BAR CONNECTION NUT REMOVAL
Use a hexagon wrench to counterhold the stabilizer link as shown. Then use a wrench to remove the nut securing the stabilizer link to the stabilizer bar.
 

 
 
<<B>> STABILIZER LINK AND STRUT CONNECTION NUT REMOVAL
Use a hexagon wrench to counterhold the stabilizer link as shown. Then use a wrench to remove the nut securing the stabilizer link to the strut.
 
 
 
 
INSTALLATION SERVICE POINTS
 
 
>>A<< STABILIZER BAR INSTALLATION
Install the stabilizer bar as shown in the figure.
 

 
 
>>B<< STABILIZER BUSHING INSTALLATION
Install the stabilizer bushing as shown in the figure.
 

 
 
>>C<< STABILIZER LINK AND STABILIZER BAR CONNECTION NUT INSTALLATION
Use a hexagon wrench to counterhold the stabilizer link as shown. Then use a wrench to install the nut securing the stabilizer link to the stabilizer bar.
 

 
 
>>D<< STABILIZER LINK AND STRUT CONNECTION NUT INSTALLATION
Use a hexagon wrench to counterhold the stabilizer link as shown. Then use a wrench to install the nut securing the stabilizer link to the strut.