1. Remove the radiator condenser tank mounting bolt, and move the radiator condenser tank to a place where it does not interfere with the drive belt tension check (Refer to GROUP 14 - Radiator ).
2.
caution
Check the drive belt tension after turning the crankshaft clockwise one turn or more.
Make sure that the indicator mark on the drive belt auto-tensioner is within the area marked with A in the illustration.
3. If the mark is out of the area A, replace the drive belt (Refer to ).
note
The drive belt tension adjustment is not necessary as the drive belt auto-tensioner is adopted.
4. Install the radiator condenser tank to the original position (Refer to GROUP 14 - Radiator ).
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
).)