![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
| warning | When removing and installing the front passenger seat, be sure to carry out accuracy check of occupant classification sensor after the seat has been installed in the vehicle. (Refer to GROUP 52B, On-vehicle Service  .) |
| caution | Before removing the front seat assembly, refer to GROUP 52B, Service Precautions and Side Airbag Module (s) . |
) |
|
)
| Connector number | Connector name |
| D-32 (2 - yellow) | Side-airbag module (squib) (LH) <Vehicles with side-airbag> |
| D-33 (2) | Seat belt switch (Driver’s side) |
| D-34 (2) | Power seat assembly (Driver’s side) |
| D-35 (4 - black) | Heated seat (LH) <Vehicles with heated seat> |
| D-39 (2 - yellow) | Side-airbag module (squib) (RH) <Vehicles with side-airbag> |
| D-40 (2 - black) | Seat belt switch (Passenger's side) |
| D-41 (4 - black) | Heated seat (RH) <Vehicles with heated seat> |
)
| note | When disconnecting the side air bag module connectors of D-32 and D-39, unlock the connector by sliding the locking button to the direction of the arrow as shown in the figure, and then disconnect the connector. |
)