[Previous][Next]
DTC C1707: Implausible coding data
 
 
caution
  • If there is any problem in the CAN bus lines, an incorrect DTC may be set. Prior to this diagnosis, diagnose the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table ).
  • Whenever ECU is replaced, ensure that the CAN bus lines are normal.
  • When DTC No.C1707 is set in ASC-ECU, the DTC may also be set in ETACS-ECU. When the DTC is set in ETACS-ECU, carry out the diagnosis of the DTC for ETACS-ECU first.
 
 
OPERATION
ASC-ECU receives the vehicle information stored in the ETACS-ECU via CAN bus lines.
 
 
 
DTC SET CONDITIONS
When received invalid coding data from the ETACS-ECU, this DTC is set.
 
 
 
TROUBLESHOOTING HINTS
  • Malfunction of ETACS-ECU
  • ETACS-ECUs have been interchanged between two vehicles.
  • ASC-ECU malfunction
  • ASC-ECUs have been interchanged between two vehicles.
  • Malfunction of ETACS-ECU coding data
  • PHEV-ECU malfunction
 
 
 
 
DIAGNOSIS
STEP 1. Scan tool (M.U.T.-IIISE) CAN bus diagnostics.
(1)
cautionTo prevent damage to scan tool (M.U.T.-IIISE), always turn off the power supply mode of the electric motor switch before connecting or disconnecting scan tool (M.U.T.-IIISE).
Connect scan tool (M.U.T.-IIISE). Refer to "How to connect the Scan Tool (M.U.T.-IIISE) ."
(2) Turn on the power supply mode of the electric motor switch.
(3) Diagnose the CAN bus line.
(4) Turn off the power supply mode of the electric motor switch.
Is the check result normal?
Go to Step 3.
Repair the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnostics Table ). On completion, go to Step 2.
 
STEP 2. DTC recheck after resetting CAN bus lines.
Is DTC No.C1707 set?
Go to Step 3.
This diagnosis is complete.
 
STEP 3. Scan tool (M.U.T.-IIISE) other system DTC.
Use scan tool (M.U.T.-IIISE) to check whether any coding-related DTC is set in ETACS-ECU or engine control module.
Is the DTC set?
Troubleshoot for the relevant DTC.
Go to Step 4.
 
STEP 4. Check part number of ASC-ECU.
Check the part number of ASC-ECU.
Is the check result normal?
Go to Step 5.
Replace the hydraulic unit (integrated with ASC-ECU) (Refer to ).
 
STEP 5. ETACS-ECU coding data check.
Refer to GROUP 00 - Coding List .
Is the check result normal?
Go to Step 6.
Replace the ETACS-ECU (Refer to GROUP 54A - ETACS-ECU ).
 
STEP 6. Check part number of ETACS-ECU.
Check the part number of ETACS-ECU.
Is the check result normal?
Go to Step 7.
Replace the ETACS-ECU (Refer to GROUP 54A - ETACS-ECU ).
 
STEP 7. PHEV-ECU coding data check.
Refer to GROUP 00 - Coding List .
Is the check result normal?
Go to Step 8.
Replace the PHEV-ECU (Refer to GROUP 54Da - PHEV-ECU ).
 
STEP 8. Check whether the DTC is set again.
Erase the DTC.
Is DTC No.C1707 set?
Replace the hydraulic unit (integrated with ASC-ECU) (Refer to ).
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/How to Cope with Intermittent Malfunctions ).