00-CODING LIST

CODING LIST

caution

With the ETACS functions being customized, if any of the ETACS-ECU variant coding and option coding items are changed, the customized contents are reset. In such case, the functions need to be recustomized.

Before troubleshooting, check that the coding data written into the engine control module (ECM), SRS-ECU, ETACS-ECU and PHEV-ECU are normal. If they are not the same as the initial settings, various functions and systems do not work normally.

VARIANT CODING

Required Special Tools:

MB992744: Vehicle communication interface-Lite (V.C.I.-Lite)
MB992745: V.C.I.-Lite main harness A
MB992747: V.C.I.-Lite USB cable short
MB992748: V.C.I.-Lite USB cable long
MB991958: Scan Tool (M.U.T.-III Sub Assembly)

MB991824: Vehicles Communication Interface (V.C.I.)
MB991827: M.U.T.-III USB Cable
MB991910: M.U.T.-III Main Harness A (Vehicles with CAN communication system)

caution

To prevent damage to scan tool (M.U.T.-IIISE), always turn the electric motor switch to the OFF position before connecting or disconnecting scan tool (M.U.T.-IIISE).

1. Ensure that the electric motor switch is at the OFF position.

2. Start up the personal computer.

3. Connect special tool MB992747/MB992748 or special tool MB991827 to special tool MB992744 or special tool MB991824 and the personal computer.

4. Connect special tool MB992745 or special tool MB991910 to special tool MB992744 or special tool MB991824.

5. Connect special tool MB992745 or special tool MB991910 to the data link connector.

note	When the special tool MB992745 is connected to the data link connector, the special tool MB992744 indicator light will be illuminated in a green color.

6. Turn the power switch of special tool MB991824 to the ON position. <When using the special tool MB991824>

note	When special tool MB991824 is energized, special tool MB991824 indicator light will be illuminated in a green color.

7. Start the M.U.T.-IIISE system on the personal computer and turn the electric motor switch to the ON position.

8. Select "STV."

9. On the system selection screen, select "MFI" to check the engine control module data, "SRS-AIR BAG" to check the SRS-ECU data, "ETACS" to check the ETACS-ECU data and "PHEV" to check the PHEV-ECU data.

10. Select "Coding."

11. Select "Coding Information & Copy."

12. If the displayed coding information is different from the corresponding initial setting in the list, replace the ECU with a correctly coded one. For replacement of the ECM, refer to GROUP 13A, Engine Control Module

. For replacement of the SRS-ECU, refer to GROUP 52B, SRS Control Unit

. For replacement of the ETACS-ECU, refer to GROUP 54A, ETACS

ENGINE CONTROL MODULE CODING DATA LIST

note	The items to be displayed may differ depending on the version of the M.U.T.-IIISE.

Item name	Initial value
Vehicle Model	OUTLANDER PHEV
Model year	(Displays the model year)
Destination	U.S.
Engine type	4B12 D4 MIVEC
S/W variation	No. 1

SRS-ECU CODING DATA LIST

note	The items to be displayed may differ depending on the version of the M.U.T.-IIISE.

Item name	Initial value
DR airbag squib(1st)	Present
PS airbag squib(1st)	Present
DR airbag squib(2nd)	Present
PS airbag squib(2nd)	Present
DR pretensioner squib	Present
PS pretensioner squib	Present
PS lap pretensioner squib	Present
RH side airbag squib	Present
LH side airbag squib	Present
RH curtain airbag squib	Present
LH curtain airbag squib	Present
DR knee airbag squib	Present
Occupant classification module	Present
DR seat position sensor	Present
Seatbelt warning indicator(CAN)	Present
PS cut off SW	Not present
DR buckle SW (mecha)	Not present
DR buckle SW (hall)	Present
PS buckle SW (mecha)	Not present
PS buckle SW (hall)	Present
Passenger's SRS OFF light	Present
Passenger's SRS ON light	Not present
LH front G sensor	Present
RH front G sensor	Present
RH side sensor B-pillar	Present
LH side sensor B-pillar	Present
RH side sensor C-pillar	Present
LH side sensor C-pillar	Present
Roll over sensor	Present
Disposal	Present
High volt.cutoff	Present
Emergency call	Not present
2nd seat(RH) pretensioner squib	Present
2nd seat(LH) pretensioner squib	Not present
Crash parameter flag(#0)	ON
Crash parameter flag(#1)	OFF
Crash parameter flag(#2)	OFF
Crash parameter flag(#3)	OFF
Crash parameter flag(#4)	OFF
Crash parameter flag(#5)	OFF
Crash parameter flag(#6)	OFF
Crash parameter flag(#7)	OFF

ETACS-ECU CODING DATA LIST

note	The items to be displayed may differ depending on the version of the M.U.T.-IIISE.

Item name	Initial value
Vehicle line	OUTLANDER PHEV
Model year	(Displays the model year)
Handle side	LHD
Destination	U.S. or EXP
Transmission	TRANS AXLE
Engine type	4B12 D4 MIVEC
Smart entry system	Type A or Type C
Keyless entry*²	Present
Immobilizer	Type A or Type B
WCM/F.A.S.T.	Present
Panic Alarm*²	Enable
OSS	Present
F.A.S.T. LF output	Type 3
F.A.S.T. SW type(Gate/trunk)	Gate 2SW
Engine Type for OSS	EV
Transmission Type for OSS	Undefined
TPMS*¹	Present(NAS 2)
TPMS information	35 psi
TPMS Off mode function	Present
AUDIO*²	Not present
AND*²	Present
Destination for HFM	U.S.
Entertainment Vehicle Line	OUTLANDER PHEV
Entertainment model year	(Displays the model year)
BSD LCA TYPE 1	Not present or Type 1
Radio Frequency*²	U.S.
Number of speaker*²	6 speakers or 8 speakers
AUX equipment	Not Present
F.A.S.T. door entry type	Switch
Corner sensor control unit*²	Not present
CAMERA	Not present or Present
Rear view camera	Present
Nose view camera	Not present or Present
Left side view camera	Not present or Present
FCM function	Not present
FCM type	Undefined or Type 2
ACC type	Undefined or Type 11 or Type 12
ACC	Not present or Present
ACC function	Not present or Present
Remote engine starter*²	NotPresent/ChgOK
IG key illumination	W/ getting off
Comfort flasher type	Present/Chg OK
Trailer turn detection	Not present
Front wiper*²	Rain Sensitive
After wipe customize	Enable(def.D)
Rear wiper mode	With Lo control
Rear wiper by reverse customize	Enable(d.FR/RR)
Auto fold mirror	SPD/Not present or Keyless/F.A.S.T.
Manner Switch*²	NotPresent/ChgNG
Auto light control*²	Hi RLS/Chg NG or Hi RLS(R48)(Cannot change)
Coming home light customize	Enable(def.E)
Welcome light customize	Enable(d.Small)
Room light delay timer/door & H/L	Long
Room light by H/L	Full
Gate/Trunk light	Mode-2 (cargo)
Head light auto cut	Enable
Head light auto cut mode	C-spec
Door Unlock Mode Customize*²	Disable
Door unlock by IG lock customize	Enable(def.D)
Key reminder unlock	B-spec/Dr and As
Horn chirp by keyless	Present/Chg OK
Theft alarm function	Present/Chg NG
Theft alarm mode	C-spec
Pre-alarm	Not present
Theft alarm sensor	Not present or Present
Theft alarm siren	Not present or Present
Theft sensor gain setting	Type 1 or Type 3 or Type 4
Siren answer	Disable
EV REMOTE-ECU*²	Not present or Present
Security type(EV REMOTE)*²	Not Present or Type A
A/C Fan Control type	PWM
Security alarm(EV REMOTE)	Not present or Present
Door control(EV REMOTE)	Not present
Panic Alarm control(EV REMOTE)	Not present
Position light cont.(EV REMOTE)	Not present or Present
Head light control(EV REMOTE)	Not present or Present
Horn control(EV REMOTE)	Not present
Battery reminder(EV REMOTE)	Not present or Present
Battery charge(EV REMOTE)	Not present or Present
Pre-A/C control(EV REMOTE)	Not present or Present
Power window type	Type P6
Power window Dr	Present
Power window As	Not present
Power window RR	Not present
Power window RL	Not present
Multi mode RKE	Disable
Gate/Trunk	Gate type
RLS overwipe type	Type 2 or Type 8
RLS WS type	Type 2 (Green)
RLS*²	Present
RLS Communication Type	LIN
LDW equipment status	Not Present or Type C
LDW Parameter status	Not parameter or Type 3
LDW production setup status	Not Present
LDW	Not present
ORC	Present
DRL type	IndependentDRL/P
DRL function*²	Present/Chg NG
Electric Slide door (Left)	Not present
Electric Slide door (Right)	Not present
Sun roof type	Not present or Type S4
Sun roof	Not present or Present
Rear S/R Unlock Output	Not present
ETG	Not present or Present
Headlight	4 beams
Headlight washer	Disable
Fold mirror	Disable or Enable
Front fog light mode	A spec.
Front fog light*²	Present
Rear fog light*²	NotPresent/ChgOK
Door lock system	A-spec(NAS)
Gate/trunk opener mode	Present(Type 1)
Horn type*²	Dual horn
H/L leveling type	Not present
Headlight Leveling system type	OUTLANDER PHEV
Rear wiper	Enable
Wiper washer check valve*²	Present
Intelligent washer customize	Enable(def.D)
ESS by turn light	Not present
Turn signal bulb	21/21/21/21/0.36
ESL	Not present
Final drive	4WD FF Base
T/M oil cooler	Not present
S-AWC	Not present
TCM	Not present
Shift lock	Not present
Transmission control type	Def./Not present
Average speed	Not available
Coolant temp gauge threshold	Normal
Vehicle language status	English
Fuel consumption scale	L/100km or MPG (US)
Tire circumference	2155mm
Frost warning threshold	U.S.
Distance to empty	Not available
Average fuel consumption	Available
Instant fuel consumption	Not available
Seat belt reminder logic	Except EU
Rear door type	HINGE
Shift Display Layout	LHD
Trip autoreset IG OFF	Available
GCC speed alarm indicator	Not present
AS&G status	Not present
Gear shift reminder	Present
Reverse alarm	Not available
Seat belt reminder control type	AABT
Charging Time Display	Present
Seat belt reminder indicator	D&P independent
Key reminder	Not available
Brake vacuum warning	Present
GCC speed alarm	Not available
Rear radar & control	Not present or Present
Rent-a-car mode IG-OFF always	Available
S-AWC Control display	Available
Service reminder schedule table	Normal
Display opening type	OEM1
Language mode	Available
Fuel tank type	Type 3
GSI system	Not present
Launch gear block alarm	Not present
Service reminder for month	6 month
Service reminder for km	12000km
Service reminder for mile	7500mile
Drive mode	Present
A/C control type	NAS
ECO gauge	Not present
ECO score	Present
Electric motor switch reminder	Present
Gate/Trunk	Gate type
Steering Wheel Switch	Present
Distance to empty(PHEV)	Present
Energy Flow	Present
EV ratio	Present
Outside temperature	Present
ECO SW(Except for PHEV)	Not present
OCM	Present
A/C	Present
Indirect light	Not present
Dome light center switch	Not present
Compressor type*²	Type 6
Temperature type	Celsius or Fahrenheit
Option Heater	Present
Indirect light type	Type1/No present
RCTA type 2	Type 2
Heater Control Panel Type	Dual LCD
EPS	Present
EPS type	Type 9
ABS	Not present
Vehicle Type for A.S.C.	Type 8
Brake Type for A.S.C.	Type 4
HBA Type	Type 1
ABS Type	Type 1
TCL Type	Type 13
A.S.C Type	Type 5
A.S.C.	Present
HSA Type	Type 1
AS&G brake hold Type	Not present
Brake prefill	Not present
Brake fade support	Not present
S-AWC Brake	Present
Enhanced TCL	Not present
TSA Type	Not present
ACC Type for A.S.C.	Not present or Type 12
FCM Type for A.S.C.	Not present
Engine power	Normal
RCTA type 3	Type 1
Fuel filter warning	Not present
Cooling fan	Relay control
Auto Stop & Go (AS&G)	Not present
RCTA type 4	Type 1 or Type 2
EV	Present
RCTA type 5	Type 1 or Type 2
Gate auto OPN by HD SW customize	Disable or Enable(def.E)
ETG Buzzer	Type B
ETG Answerback	Present
TP STAT	Type 2
TRCP	Enable or Disable
Battery heater type	Type B or Not present
Automatic High Beam	Not present or Present
BSD LCA TYPE 2	Not present or Type 1
SONAR data	Not parameter
UMS type	Not present
Corner sensor type*²	Not present
BSW type	Not present or Type A
Heated Windscreen	Not present
SONAR	Not present
Camera display type	Type 7
Predictive guideline	Type 3
Front camera position	Undefined
Automatic High Beam type	Not present or Type 3 or Type 4
FCM camera	Not present or Present
FCM function 2	Not present or Present
FCM type 2	Undefined or Type 25
TSD equipment	Not present
Fuel type 1 for e-Call	Present
Fuel type 2 for e-Call	Not present
Fuel type 3 for e-Call	Not present
Fuel type 4 for e-Call	Not present
Fuel type 5 for e-Call	Present
Fuel type 6 for e-Call	Not present
Fuel type 7 for e-Call	Not present
Fuel type 8 for e-Call	Not present
Sound type for e-Call	Type 6
Turn-by-Turn Status	Not present
Destination for SDA	DEST 4 or DEST 5 or DEST 6
Destination for e-Call	Not EU/RUSSIA
HDC type	Not present
Brake auto hold	Present
EPB	Present
RCTA type 6	Type 1 or Type 2
Acceleration type for A.S.C.	Type 1
Auto release type for EPB	Type 9
Brake type for EPB	Type 2
Dynamic brake type	Type 1
RCTA type 1	Not present or Type 1
FCM Type 2 for A.S.C.	Not present or Type 4
e-Call	Not present
Charge amount customization	Disable
GATEWAY	Not present or Present
Hazard answer back customization	With 0 time answer back

note	¹: TPMS is an abbreviation of Tire Pressure Monitoring System, DRL of Daytime Running light. ²: The setting can be changed by the option coding. Refer to .

PHEV-ECU CODING DATA LIST

note	The items to be displayed may differ depending on the version of the M.U.T.-IIISE.

Item name	Initial value
IMMOBILIZER	Present
Adaptive Cruise Control	Not present or Present
Paddle Shift	Present
Electric Heater for A/C	Present
UMS control	Not present
Tire circumference	2155 mm
EV Remote System	Not present
Speed Limit Function	Not present
Cruise Control	Present
EV Remote System(OPC)	Not accept
Speed Limit Function(OPC)	Not accept
Cruise Control(OPC)	Not accept
S/W variation	Variation No.1

OPTION CODING

caution

If there is any item indicated by the option coding after equipment change, set ETACS-ECU so that the option coding data corresponds with the equipment content. Pay attention to that the concerned functions and systems do not work normally if the setting does not correspond with the equipment.
With the ETACS functions being customized, if any of the ETACS-ECU option coding items are changed, the customized contents are reset. In such case, the functions need to be recustomized.
While the M.U.T.-IIISE is communicating with the vehicle, the electric motor switch may not be turned off and no normally. Therefore, when you turn off the electric motor switch for that communication, wait for several seconds and then turn on it again (do not turn on it immediately).

The ETACS-ECU option coding data can be checked or changed by operating M.U.T.-IIISE.

How to check option coding data

Connect the M.U.T.-IIISE. Refer to .
Select "ETACS" on the system selection screen.
Select "Coding."
Select "Option Coding Information."
Check the displayed option coding information.

How to change option coding data

Connect the M.U.T.-IIISE. Refer to .
Select "ETACS" on the system selection screen.
Select "Coding."
Select "Option Coding."
Change to correct option coding data.

LIST <ETACS-ECU>

Item name
Auto light control
Keyless entry
AUDIO
RLS
Number of speaker
Radio Frequency
Front fog light
Rear fog light
Horn type
Manner Switch
Remote engine starter
AND
Compressor type
DRL function
Wiper washer check valve
ESS Cancel Function
EV REMOTE-ECU
Security type(EV REMOTE)
Panic Alarm
Door Unlock Mode Customize
Front wiper
Corner sensor control unit
Corner sensor type