[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Pre-removal and Post-installation Operation
  • Motor Coolant Draining and Refilling (Refer to ).
  • Headlight Support Upper Panel Cover and Radiator Grille Removal and Installation (Refer to GROUP 51 - Radiator Grille ).
EV radiator condenser tank removal steps
•Air cleaner intake duct (Refer to GROUP 15 - Air Cleaner ).
<<A>>>>A<<1.EV radiator condenser tank hose B connection (EV radiator condenser tank side)
<<A>>>>A<<2.EV radiator condenser tank hose A connection (EV radiator condenser tank side)
>>B<<3.EV radiator condenser tank bracket LH
>>B<<4.EV radiator condenser tank bracket RH
5.Ground bolt
6.EV radiator condenser tank
EV radiator removal steps
•Engine room under cover front A, B (Refer to GROUP 51 - Under Cover ).
•Front bumper assembly (Refer to GROUP 51 - Front Bumper Assembly ).
•Airguide panel upper (Refer to GROUP 42A - Loose Panel ).
<<A>>>>A<<2.EV radiator condenser tank hose A connection (EV radiator side)
<<A>>>>A<<7.EV radiator piping hose E connection (EV radiator side)
8.EV radiator bracket LH
9.EV radiator bracket RH
10.EV radiator lower insulator assembly LH
11.EV radiator lower insulator assembly RH
12.EV radiator
13.Clip
14.EV radiator guard
 
 
REMOVAL SERVICE POINT
 
 
<<A>> EV RADIATOR CONDENSER TANK HOSE/EV RADIATOR PIPING HOSE REMOVAL
Make mating marks on the hose and the hose clip as shown to install them in the original position.
 

 
 
 
INSTALLATION SERVICE POINTS
 
 
>>A<< EV RADIATOR PIPING HOSE/EV RADIATOR CONDENSER TANK HOSE CONNECTION
1. Insert the hose until the protrusion of the fitting.
2. Align the mating marks on the hose and hose clip.
 
 
 
>>B<< EV RADIATOR CONDENSER TANK BRACKET INSTALLATION
Engage the recess on the EV radiator condenser tank with the protrusion on the bracket securely.