REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
Engine Coolant Draining and Refilling (Refer to
).
Water Pump Drive Belt Removal and Installation (Refer to GROUP 11A - Crankshaft Pulley
).
Removal steps
>>A<<
1.
Water pump pulley
2.
Water pipe mounting nut
3.
Water pump
Water pipe gasket
5.
Water pump gasket
INSTALLATION SERVICE POINT
>>A<< WATER PUMP PULLEY INSTALLATION
Temporarily tighten the water pump pulley mounting bolts. Then, tighten them to the specified torque after the installation of water pump drive belt.
Tightening torque: 8.8 ± 1.0 N·m (78 ± 8 in-lb)
).).![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)