STEP 1. Using scan tool (M.U.T.-IIISE), read the diagnostic trouble code (DTC).
caution | To prevent damage to scan tool (M.U.T.-IIISE), always turn off the power supply mode of the electric motor switch before connecting or disconnecting scan tool (M.U.T.-IIISE). |
(1) Connect scan tool (M.U.T.-IIISE). Refer to HOW TO CONNECT THE SCAN TOOL (M.U.T.-IIISE) . (2) Turn on the power supply mode of the electric motor switch.
(3) After the DTC has been deleted, read the DTC again.
(4) Turn off the power supply mode of the electric motor switch.
Is DTC P2229 set?
Replace the ECM (Refer to Removal and Installation ). It can be assumed that this malfunction is intermittent. Refer to GROUP 00, How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions .