[Previous][Next]
TROUBLE SYMPTOM CHART
caution
  • When you replace the camera-ECU, you should teach the camera-ECU for the multi-around monitor by writing a learned value. On completion, you should check the camera image on the multi around monitor "Bird's eye-view." If necessary, calibrate the camera (Refer to ).
  • When you remove/install or replace the camera, you should check the camera image on the multi around monitor "Bird's eye-view." If necessary, calibrate the camera (Refer to ).
Trouble symptomInspection Procedure No.Reference page
Check the camera-ECU power supply circuit.1
No image is displayed.2
Any of the camera images is blue.3
The image is not switched when the selector lever is moved to the R position.4
A screen is not switched when the vehicle speed reaches a predetermined value.5
A camera image is displayed when the selector lever is moved to the R position, but it is not switched when the camera switch is pressed.6