Recheck for diagnostic trouble code.
Check again if the DTC is stored to the occupant classification-ECU.(1) caution | To prevent damage to scan tool (M.U.T.-III), always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool (M.U.T.-III). |
Connect scan tool (M.U.T.-III) to the data link connector.
(2) Erase the DTC.
(3) Turn the ignition switch from "LOCK" (OFF) position to "ON" position.
(4) Check if DTC is stored.
(5) Turn the ignition switch to the "LOCK" (OFF) position.
Is the DTC stored?
Replace the front seat cushion cover and pad assembly. The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to use Troubleshooting/inspection Service Points - How to Cope with Intermittent Malfunction ).