[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Pre-removal and Post-installation Operation
Side Air Dam Removal and Installation (Refer to .)
Removal steps
<<A>>1.Front bumper molding
2.Front bumper face pad
>>B<<3.Front wheel arch molding
4.Front overfender pad
>>A<<5.Rear wheel arch molding
6.Rear overfender pad
<<B>>7.Rear bumper molding
8.Rear bumper pad
 
 
REMOVAL SERVICE POINT
 
 
<<A>> FRONT BUMPER MOLDING REMOVAL
cautionAs the front wheel arch molding and the front bumper molding overlap, hold the front wheel arch molding with hand when removing the front bumper molding to prevent deformation.
 

 
 
<<B>> REAR BUMPER MOLDING REMOVAL
cautionAs the rear wheel arch molding and the rear bumper molding overlap, hold the rear wheel arch molding with hand when removing the rear bumper molding to prevent deformation.
 
 
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< REAR WHEEL ARCH MOLDING INSTALLATION
Application position of double-sided adhesive tape
 
 
 
>>B<< FRONT WHEEL ARCH MOLDING INSTALLATION
Application position of double-sided adhesive tape