|
SYMPTOM |
INSPECTION PROCEDURE NO. |
REFERENCE PAGE |
| Communication with scan tool MB991958 is not possible is not possible with all system. |
1 |
|
| Communication with scan tool MB991958 is not possible with SRS system only. |
2 |
|
| When the ignition key is turned to "ON" (engine stopped), the SRS warning light does not illuminate. |
Refer to DTC No.43. |
|
| After the ignition switch is turned to "ON," the SRS warning light does not go off within approximately 7 seconds. |
Refer to DTC No.43. |
|