---

REMOVAL AND INSTALLATION

Never attempt to disassemble or repair the air bag modules or clock spring. If faulty, replace it.
Do not drop the air bag modules or clock spring or allow contact with water, grease or oil.
Replace it if a dent, crack, deformation or rust is detected.
The air bag modules should be stored on a flat surface and placed so that the pad surface is facing upward. Do not place anything on top of it.
Do not expose the air bag modules to temperatures over 93° C (200° F).
After deployment of an air bag, replace the air bag modules. Check the clock spring, and if faulty, replace it with a new part.
Wear gloves and safety glasses when handling air bags that have already deployed.
An undeployed air bag module should only be disposed of in accordance with the procedures (Refer to .)

---