TOOL

TOOL NUMBER AND NAME

SUPERSESSION

APPLICATION

MB991958 A: MB991824 B: MB991827 C: MB991910 D: MB991911 E: MB991914 F: MB991825 G: MB991826 MUT-III sub assembly A: Vehicle communication interface (V.C.I.) B: MUT-III USB cable C: MUT-III main harness A (Vehicles with CAN communication system) D: MUT-III main harness B (Vehicles without CAN communication system) E: MUT-III main harness C (for Daimler Chrysler models only) F: MUT-III measurement adapter G: MUT-III trigger harness

MB991824-KIT G: MB991826 MUT-III trigger harness is not necessary when pushing V.C.I. ENTER key.

Checking diagnostic trouble code MUT-III main harness B (MB991911) should be used. MUT-III main harness A and C should not be used for this vehicle.

MB991865 Dummy resistor

SRS air bag circuit check

MB991866 Resistor harness

MB991223 A: MB991219 B: MB991220 C: MB991221 D: MB991222 Harness set A: Test harness B: LED harness C: LED harness adapter D: Probe

-

Checking the continuity and measuring the voltage at the SRS-ECU harness connector

MB991613 SRS check harness

MB991613

Clock spring check

MR990803 Steering wheel puller

General service tool

Removal of steering wheel

MB686560 SRS air bag adapter harness A

General service tool

Deployment of air bag module and seat belt pre-tensioner inside the vehicle Deployment of air bag module and seat belt pre-tensioner outside the vehicle

MR203491 or MB628919 SRS air bag adapter harness B

General service tool

Deployment of air bag module (driver's side) outside the vehicle