[Previous][Next]
DIAGNOSTIC TROUBLE CODE CHART <BSW-ECU (MASTER)>
noteThe scan tool (M.U.T.-IIISE) will designate the BSW-ECU (master), which is installed at the left side of the rear bumper, as "BSW, and the BSW-ECU (slave), which is installed at the right side, as "BSW (SUB)."
DTC No.Diagnostic contentsReference page
C2320Radar failure
C2322Mirror IND. SHT.to PWR supply
C2323Mirror indicator short to ground
C2324Mirror indicator disconnection
C2325Radar horizontal misalignment(L)
C2326Radar horizontal misalignment(R)
C2327Radar module dirt
C2328Radar PWR.supply VOLT.(Below 9V)
C2329Radar PWR.supply VOLT(Above 16V)
C2330Radar TEMP. (Out of guarantee)
C2331Yaw rate signal error
C2332Master-Slave communication fail
C2333SAS malfunction
C2334SAS neutral point not learned
C2335Vehicle speed not determined
C2336Shift position not determined
U0101T/M CAN timeout
U0121ABS/ASC CAN timeout
U0126SAS CAN timeout
U0141ETACS CAN timeout
U0146GATEWAY CAN timeout
U1190No receive fault detect signal
U1195Coding not completed