[Previous][Next]
DIAGNOSTIC TROUBLE CODE CHART
cautionDuring troubleshooting, a DTC associated with other systems may be set when the ignition switch is turned to "ON" position with connector(s) disconnected. On the completion of troubleshooting, confirm all systems for DTC(s). If DTC(s) are set, erase them all.
DTCDiagnostic itemReference page
B1083EEPROM fail
B2560Secure boot failure
U0141ETACS CAN timeout
U1190No receive fault detect signal
U1F50CAN1 Bus-off
U1F51CAN2 Bus-off
U1F52CAN3 Bus-off
U1F53CAN4 Bus-off