[Previous][Next]
REMOVAL AND INSTALLATION
 
 
cautionWhen you replace the camera-ECU, you should teach the camera-ECU for the multi-around monitor by writing a learned value. On completion, you should check the camera image on the multi around monitor "Bird’s eye-view." If necessary, calibrate the camera (Refer to ).
Pre-removal and Post-installation Operation
  • Instrument Panel Side Cover (RH) Removal and Installation (Refer to GROUP 52A - Instrument Panel Assembly ).
  • Glovebox and Instrument Panel Under Cover Assembly Removal and Installation (Refer to GROUP 52A - Glove Box ).
  • Cowl Side Trim Removal and Installation (Refer to GROUP 52A - Trims, Interior Trim ).
Removal steps
1.Camera-ECU sub wiring harness
2.Camera-ECU, bracket
3.Camera-ECU
4.Bracket