[Previous][Next]
DIAGNOSTIC TROUBLE CODE CHART
cautionOn troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), DTC(s) associated with other system may be set. On completion, confirm all systems for DTC(s). If DTC(s) are set, erase them all.
DTC No.Diagnostic itemReference page
B16A2Turn signal(LH) bulb outage
B16A3Turn signal(LH) circuit short
B16A4Turn signal(RH) bulb outage
B16A5Turn signal(RH) circuit short
B16A6Turn signal fuse blown
B16A9Turn light(LH) deactivated
B16AATurn light(RH) deactivated