When you remove/install or replace the camera, you should check the camera image on the multi around monitor "Bird’s eye-view." If necessary, calibrate the camera (Refer to ).
To ensure the camera image is clearly visible, wipe the lens with a damped rag and then a dry rag to remove dust, rain drops or snow.
Be careful not to damage the camera. Any damage may have an adverse effect on the screen image.
<FRONT-VIEW CAMERA>
Pre-removal and Post-installation Operation
Front Bumper Assembly Removal and Installation (Refer to GROUP 51 - Front Bumper Assembly ).
<REAR-VIEW CAMERA>
For how to remove the rear-view camera, refer to .
<SIDE-VIEW CAMERA>
For how to remove the side-view camera, refer to GROUP 51 - Door Mirror .
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
).)