[Previous][Next]
REMOVAL AND INSTALLATION
 
 
The following bolts and screws are used for installing the instrument panel. Bolts and screws are indicated as marks shown in the illustration in the sections of "Removal and Installation" and "Disassembly and Assembly."
NameSymbolSize (D X L) mmColorShape
Tapping screwa5 X 12-
b5 X 16-
c5 X 12-
d5 X 16-
Washer assembly bolte6 X 16-
D: Thread diameter, L: Effective thread length
 
 
caution
  • Before removal and installation the SRS components, refer to GROUP 52B - SRS Service Precautions , Knee Air Bag Module and Passenger’s (Front) Air Bag Module .
  • Do not subject the SRS-ECU to any shocks when removing or installing the instrument panel.
Instrument panel side cover removal steps
1.Instrument panel side cover
Front speaker garnish removal
2.Front speaker garnish
Instrument panel side air outlet removal
3.Instrument panel side air outlet
Combination meter bezel removal steps
Combination meter bezel (Refer to GROUP 54A - Combination Meter ).
4.Engine switch or switch plug
Steering column cover removal steps
5.Instrument panel key cylinder panel <Vehicles with OSS>
6.Steering column cover lower
7.Steering column cover upper
 
 
Removal steps
Front pillar trim (Refer to ).
Glovebox case assembly (Refer to ).
Instrument panel lower assembly (Refer to ).
Knee air bag module (Refer to GROUP 52B - Knee Air Bag Module ).
ECALL speaker (Refer to GROUP 54A - ECALL Speaker ) <Vehicles with TCU>.
GNSS/TEL antenna assembly (Refer to GROUP 54A - GNSS/TEL Antenna Assembly ) <Vehicles with TCU>.
Instrument panel console box center assembly (Refer to ).
Combination meter assembly (Refer to GROUP 54A - Combination Meter ).
Head up display (Refer to GROUP 54A - Head Up Display ).
Tweeter (Refer to GROUP 54A - Speaker ).
Receiver antenna (Refer to GROUP 54A - Receiver Antenna ) <Vehicles without keyless operation system>.
KOS&OSS-ECU (Refer to GROUP 42B - KOS&OSS-ECU ).
TEL antenna assembly (Refer to GROUP 54A - TEL Antenna Assembly ) <Vehicles with TCU>.
Passenger’s (front) air bag module connection (Refer to GROUP 52B - Passenger’s (Front) Air Bag Module ).
Wiring harness connection
1.Instrument panel assembly
2.Instrument panel knee protector bracket
3.Instrument panel lower knee protector