STEP 5. Using scan tool (M.U.T.-IIISE), check whether the DTC is set again.
Check again if the DTC is set.(1) caution | To prevent damage to scan tool (M.U.T.-IIISE), always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool (M.U.T.-IIISE). |
Connect scan tool (M.U.T.-IIISE). Refer to "How to Connect the Scan Tool (M.U.T.-IIISE)
."
(2) Erase the DTC.
(3) Turn the ignition switch to the LOCK (OFF) position.
(4) Turn the ignition switch to the ON position.
(5) Operate the electric parking brake switch to apply and then release the electric parking brake.
(6) Check the DTC.
Is the DTC C1861 set?
Replace the electric parking brake ECU (Refer to ). The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction ).