[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Electric parking brake actuator assembly removal steps
1.Electric parking brake actuator assembly connector connection.
2.Electric parking brake actuator assembly
>>B<<3.O-ring
Electric parking brake harness assembly removal steps
Floor console assembly rear (Refer to GROUP 52A - Rear Floor Console Assembly ).
Front seat assembly (Refer to GROUP 52A - Front Seat Assembly ).
Rear seat assembly (Refer to GROUP 52A - Rear Seat Assembly ).
Center pillar trim lower (Refer to GROUP 52A - Trim ).
Rear floor under cover (Refer to GROUP 51 - Under Cover ).
4.Electric parking brake harness assembly connector connection.
1.Electric parking brake actuator assembly connector connection.
5.Bracket
6.Cable clamp
>>A<<7.Electric parking brake harness assembly
8.Electric wiring tape
 
 
INSTALLATION SERVICE POINTS
 
 
>>A<< ELECTRIC PARKING BRAKE HARNESS ASSEMBLY INSTALLATION
Guide the electric parking brake wiring harness assembly so that the markings on the grommets face as shown.
 
 
 
>>B<< O-RING INSTALLATION
Apply the specified grease to the O-ring.
Specified grease: Cosmo rubber grease or equivalent