[Previous][Next]
VALVE BODY HARNESS CHECK
1. Disconnect the CVT assembly connector.
2. Remove the oil pan (Refer to ).
3. Disconnect the valve body harness connector.
4. Check for continuity between the relevant CVT assembly connector terminals and the valve body harness connector terminals.

ItemTerminal numberResistance value
CVT assembly connector sideValve body harness connector side
Line pressure solenoid valve15Continuity exists (2 Ω or less)
1Other than aboveNo continuity
Primary pressure solenoid valve212Continuity exists (2 Ω or less)
2Other than aboveNo continuity
Secondary pressure solenoid valve34Continuity exists (2 Ω or less)
3Other than aboveNo continuity
Select solenoid valve42Continuity exists (2 Ω or less)
4Other than aboveNo continuity
Lock-up solenoid valve53Continuity exists (2 Ω or less)
5Other than aboveNo continuity
Primary pressure sensor1311Continuity exists (2 Ω or less)
13Other than aboveNo continuity
Secondary pressure sensor149Continuity exists (2 Ω or less)
14Other than aboveNo continuity
Sensor ground188Continuity exists (2 Ω or less)
18Other than aboveNo continuity
Sensor power supply2210Continuity exists (2 Ω or less)
22Other than aboveNo continuity
5. If not as specified, replace the valve body harness (Refer to ).