---

REMOVAL AND INSTALLATION


Never attempt to disassemble or repair the seat belt pre-tensioner. If faulty, replace it.
Be extremely careful when handling the seat with pre-tensioner. Do not subject it to shocks, drop it, bring it close to strong magnets or allow contact with water, grease or oil. Always replace it with a new part if any dents, cracks or deformation is found.
Do not place anything on top of the seat belt pre-tensioner.
Do not expose the seat belt pre-tensioner to temperatures over 90°C (194°F).
After operating the seat belt pre-tensioner, replace the seat belt pre-tensioner with a new part.
Gloves and protective goggles should be worn when handling a seat belt pre-tensioner once it has been used.
If disposing of a seat belt with pre-tensioner which has not yet been used, its seat belt pre-tensioner should be operated first before disposal (Refer to ).

---