23-VALVE BODY DISASSEMBLY AND ASSEMBLY

ASSEMBLY SERVICE POINTS

►A◄ SPRING, STEEL BALL, DAMPING VALVE AND DAMPING VALVE SPRING INSTALLATION

1.Install the steel balls (two pieces) and springs (two pieces) to the inside valve body as shown.
2.Install the damping valve and spring to the inside valve body as shown.

►B◄ SPRING AND STEEL BALL INSTALLATION

Install the steel balls (three pieces) and springs (two pieces) to the inside valve body as shown.

►C◄ SOLENOID VALVES INSTALLATION

1.Apply ATF or petroleum jelly (Vaseline) to the O-ring and install carefully.
2.Install the solenoid valves by referring to the marks applied during disassembly.

NO. NAME

1 Underdrive solenoid valve

2 Second solenoid valve

3 Torque converter clutch control solenoid valve

4 Overdrive solenoid valve

5 Low-reverse solenoid valve