![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
| Code No. | Diagnostic item | Reference page | Service data display contents when diagnostic trouble code is set |
| B1001 | Inside temperature sensor low |  | 25°C (77°F) |
| B1002 | Inside temperature sensor high | ||
| B1041 | A/M damper potentiometer high | | - |
| B1042 | A/M damper potentiometer low | ||
| B1045 | Air mix damper motor | | - |
| B1061 | Air outlet damper potentio.high | | - |
| B1062 | Air outlet damper potentio.low | ||
| B1065 | Air outlet changeover DMPR.motor | | - |
| B1083 | EEPROM fail | | - |
| U1000 | OSS/F.A.S.T._OSS CAN timeout | | - |
| U1100 | Engine CAN timeout | | - |
| U1108 | Meter CAN timeout/Not equipped | | - |
| U1109 | ETACS CAN timeout/Not equipped | | - |
| U1116 | F.A.S.T. CAN timeout/Not equipped | | - |
| U1190 | No receive fault detect signal | | - |
| U1195 | Coding not completed | | - |
| note | Diagnostic trouble codes regarding the A/C pressure sensor and the fin thermo sensor will be set in the engine control module. For details, refer to GROUP 13A - Diagnostic Trouble Code Inspection Procedure. |
| Code No. | Diagnostic item | Reference page |
| P0532 | A/C pressure sensor circuit low | Refer to GROUP 13A - |
| P0533 | A/C pressure sensor circuit high | Refer to GROUP 13A - |
| P0537 | A/C EVAP. TEMP. SNSR. circuit low <Automatic A/C> | Refer to GROUP 13A - |
| P0538 | A/C EVAP. TEMP. SNSR. circuit high <Automatic A/C> | Refer to GROUP 13A - |