[Previous][Next]
DIAGNOSTIC TROUBLE CODE CHART
cautionDuring troubleshooting, a DTC associated with other systems may be stored when the ignition switch is turned ON with connector(s) disconnected. On the completion of troubleshooting, confirm all systems for DTC(s). If DTC(s) are stored, erase them all.
DTC No.Diagnostic itemReference page
B1702Transponder read errorRefer to .
B1703Transponder ID unmatched
B1722Immobilizer-antenna fail
B1731PCM authentification timeout
B1766Already learned by other vehicle
B1A28PCM authentification error
B1706*2Flasher fuse blownRefer to .
B1707*2Flasher open
B1709ETACS ECU (EEPROM)
B1760*1, 2Coding not completed
B1761*1VIN not programmed
B1762*2IOD fuse not seated fully
B1765*2ECU fuse
B1763Lighting switchRefer to .
B1764Wiper switch
B2206VIN error/Mismatch
U1000CAN communicationOSS/F.A.S.T._OSS CAN timeout
U1100Engine CAN timeout
U1101T/M CAN timeout/Not equipped
U1102ASC/TCL/ABS timeout/Not equipped
U1108Meter CAN timeout/Not equipped
U1110A/C CAN timeout/Not equipped
U1116F.A.S.T. CAN timeout/No equipped
U1150*2Fail Info. for vehicle speed
U1500LIN communicationColumn ECU LIN timeout/Not equipRefer to GROUP 54B - DTC Chart .
U1507LIN transmission bit error
U1530Column ECU LIN checksum error
U1570No bus activity error for LIN
note
  • *1: If DTCs No. B1760 or B1761 is stored, there may be an error with the coding data stored in the ETACS-ECU.
  • *2: Does not detect historic trouble.