REMOVAL AND INSTALLATION
Pre-removal Operation
Drive Belt Removal (Refer to GROUP 11A - Crankshaft Pulley
).
Post-installation Operation
Drive Belt Installation (Refer to GROUP 11A - Crankshaft Pulley
).
Removal steps
1.
Generator brace
<<A>>
>>A<<
2.
Generator pivot bolt
<<B>>
3.
Generator assembly
REMOVAL SERVICE POINTS
<<A>> GENERATOR PIVOT BOLT REMOVAL
Slide the radiator lower hose clip and then remove the generator pivot bolt.
<<B>> GENERATOR ASSEMBLY REMOVAL
Remove the generator assembly from above the vehicle.
INSTALLATION SERVICE POINT
>>A<< GENERATOR PIVOT BOLT INSTALLATION
Install the generator pivot bolt and then reposition the radiator lower hose clip in its original position.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
