[Previous][Next]
REMOVAL AND INSTALLATION
cautionDo not apply grease or lubricant to the switch and the switch installation section to avoid malfunction of the switch. In addition, do not use gloves which have grease on them.
Pre-removal Operation
Clutch Cable Connection Removal (Refer to GROUP 21A - Clutch Control ).
Post-installation Operation
  • Clutch Cable Connection Installation (Refer to GROUP 21A - Clutch Control ).
  • Brake Pedal Adjustment (Refer to ).
Removal steps
1.Stoplight switch connector
2.Stoplight switch
3.Pedal clip
4.Snap pin
5.Clevis pin
6.Pedal pad
7.Brake pedal assembly