[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Pre-removal operation
  • Loosen the clutch cable (transaxle side) adjusting nut as far as possible.
  • Instrument Panel Lower Cover Removal (Refer to GROUP 52A - Instrument Lower Panel ).
  • Knee Air Bag Module Removal (Refer to GROUP 52B - Knee Air Bag Module ).
Post-installation operation
  • Knee Air Bag Module Installation (Refer to GROUP 52B - Knee Air Bag Module ).
  • Instrument Panel Lower Cover Installation (Refer to GROUP 52A - Instrument Lower Panel ).
  • Clutch Pedal Adjustment (Refer to .)
Clutch pedal removal steps
1.Clutch cable connection (clutch pedal side)
2.Snap pin
3.Clevis pin
4.Brake and clutch pedal assembly
5.Pedal pad
6.Pedal stopper
7.Pedal stopper
<<A>>8.Clutch interlock switch (for starter relay)
9.Clutch interlock switch (for OSS and cruise control)
10.Clutch pedal
Clutch cable removal steps
1.Clutch cable connection (clutch pedal side)
•Battery and Battery Tray Removal and Installation (Refer to GROUP 54A - Battery ).
11.Cotter pin
12.Clutch cable connection (transaxle side)
13.Clutch cable
14.Clutch cable bracket
Clutch interlock switch removal steps
<<A>>8.Clutch interlock switch (for starter relay)
9.Clutch interlock switch (for OSS and cruise control)
 
 
REMOVAL SERVICE POINTS
 
 
<<A>> CLUTCH INTERLOCK SWITCH REMOVAL
caution
  • Use long-nose pliers to hold the clutch interlock switch bracket to avoid damage to the clutch interlock switch. Then remove the clutch interlock switch.