Diagnosis Procedure
1.
CHECK PHEV ECU SYSTEM
With M.U.T.-III SE
Perform Diagnostic Trouble Code for “TRANSMISSION”.
Is DTC detected?
Check the DTC. Refer to
DIAGNOSTIC TROUBLE CODE CHART
.
.
2.
ERASE DIAGNOSTIC TROUBLE CODE RESULT
With M.U.T.-III SE
Erase Diagnostic Trouble Code result for “CHASSIS CONTROL”.
Turn the electric motor switch OFF and wait for 10 seconds or more.
:
INSPECTION END
With M.U.T.-III SE![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Check the DTC. Refer to DIAGNOSTIC TROUBLE CODE CHART
.