Diagnosis Procedure
1.
CHECK BSW INDICATOR CIRCUIT LH (FOR SHORT)
Turn the electric motor switch OFF.
Disconnect side radar LH harness connector and door mirror (passenger side) harness connector.
Check continuity between side radar LH harness connector and ground.
Side radar LH
Ground
Continuity
Connector
Terminal
B461
6
Not existed
Is the inspection result normal?
.
Repair the harnesses or connectors.
2.
REPLACE THE DOOR MIRROR (PASSENGER SIDE)
Replace the door mirror (passenger side). Refer to
Removal and Installation
.
Erase in "Diagnostic Trouble Code" of “Side radar (Rear left)” with M.U.T.-III SE.
Perform “Read All DTCs” with M.U.T.-III SE.
Check if the “U1B46-11” is detected in "Diagnostic Trouble Code" of “Side radar (Rear left)”
Is the DTC “U1B46-11” detected?
Replace the side radar LH. Refer to
Removal and Installation
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
. 
Repair the harnesses or connectors. . Replace the side radar LH. Refer to Removal and Installation. INSPECTION END